Справочник по API для разработчиков v3

Начиная

Ключ API необходим для обработки запросов системой. Когда пользователь регистрируется, для него автоматически генерируется ключ API. Ключ API должен отправляться с каждым запросом (см. полный пример ниже). Если ключ API не отправлен или просрочен, будет ошибка. Пожалуйста, не забудьте сохранить свой ключ API в секрете, чтобы предотвратить злоупотребление.

Аутентификация

Для аутентификации в системе API вам необходимо отправлять ключ API в качестве токена авторизации с каждым запросом. Пример кода вы можете увидеть ниже.

curl --location --request POST 'https://youlink.biz/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);
Ограничение скорости

Наш API имеет ограничитель скорости для защиты от всплесков запросов, чтобы максимизировать его стабильность. Наш ограничитель скорости в настоящее время ограничен 30 запросов в 1 минуту.

Вместе с ответом будет отправлено несколько заголовков, которые можно просмотреть, чтобы определить различную информацию о запросе.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
Обработка ответов

Все ответы API по умолчанию возвращаются в формате JSON. Чтобы преобразовать это в пригодные для использования данные, необходимо будет использовать соответствующую функцию в соответствии с языком. В PHP функция json_decode() может использоваться для преобразования данных либо в объект (по умолчанию), либо в массив (установите для второго параметра значение true). Очень важно проверить ключ ошибки, поскольку он предоставляет информацию о том, была ли ошибка или нет. Вы также можете проверить код заголовка.

{
    "error": 1,
    "message": "An error ocurred"
}

Account

Get Account
GET https://youlink.biz/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

curl --location --request GET 'https://youlink.biz/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "sample@domain.com",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
Update Account
PUT https://youlink.biz/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

curl --location --request PUT 'https://youlink.biz/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "newemail@google.com",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'email' => 'newemail@google.com',
  'password' => 'newpassword',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Account has been successfully updated."
}

QR-коды

List QR codes
GET https://youlink.biz/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/youlink.biz\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/youlink.biz\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
Get a single QR Code
GET https://youlink.biz/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

curl --location --request GET 'https://youlink.biz/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/youlink.biz\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
Create a QR Code
POST https://youlink.biz/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОписание
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://youlink.biz/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/youlink.biz\/qr\/a58f79"
}
Update QR Code
PUT https://youlink.biz/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОписание
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://youlink.biz/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "QR has been updated successfully."
}
Delete a QR Code
DELETE https://youlink.biz/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

curl --location --request DELETE 'https://youlink.biz/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Кампании

List Campaigns
GET https://youlink.biz/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
Создать кампанию
POST https://youlink.biz/api/campaign/add

A campaign can be added using this endpoint.

ПараметрОписание
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://youlink.biz/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Campaign',
  'slug' => 'new-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://youlink.biz/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://youlink.biz/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
Обновление кампании
PUT https://youlink.biz/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОписание
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://youlink.biz/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Twitter Campaign',
  'slug' => 'twitter-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://youlink.biz/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://youlink.biz/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

Каналы

List Channels
GET https://youlink.biz/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://youlink.biz/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/youlink.biz\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/youlink.biz\/mybio",
                "link": "https:\/\/youlink.biz\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
Create a Channel
POST https://youlink.biz/api/channel/add

A channel can be added using this endpoint.

ПараметрОписание
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://youlink.biz/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Channel',
  'description' => 'my new channel',
  'color' => '#000000',
  'starred' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://youlink.biz/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

ПараметрОписание
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://youlink.biz/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
Update Channel
PUT https://youlink.biz/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОписание
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://youlink.biz/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Acme Corp',
  'description' => 'channel for items for Acme Corp',
  'color' => '#FFFFFF',
  'starred' => false,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://youlink.biz/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://youlink.biz/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

Мои домены

List Branded Domains
GET https://youlink.biz/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://youlink.biz/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

ПараметрОписание
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://youlink.biz/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'domain' => 'https://domain1.com',
  'redirectroot' => 'https://rootdomain.com',
  'redirect404' => 'https://rootdomain.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "id": 1
}
Обновить домен
PUT https://youlink.biz/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОписание
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://youlink.biz/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'redirectroot' => 'https://rootdomain-new.com',
  'redirect404' => 'https://rootdomain-new.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://youlink.biz/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://youlink.biz/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

Оверлеи с призывом к действию

List CTA Overlays
GET https://youlink.biz/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Пиксели

List Pixels
GET https://youlink.biz/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://youlink.biz/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

ПараметрОписание
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://youlink.biz/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'gtmpixel',
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "id": 1
}
Обновить пиксель
PUT https://youlink.biz/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОписание
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://youlink.biz/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://youlink.biz/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://youlink.biz/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

Собственные заставки

List Custom Splash
GET https://youlink.biz/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОписание
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://youlink.biz/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Ссылки


Plans

This endpoint is only accessible by users with admin privileges.

List Plans
GET https://youlink.biz/api/plans

Get a list of all plans on the platform.

curl --location --request GET 'https://youlink.biz/api/plans' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/plans",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "name": "Business",
            "free": false,
            "prices": {
                "monthly": 9.9900000000000002,
                "yearly": 99.989999999999995,
                "lifetime": 999.99000000000001
            },
            "limits": {
                "links": 100,
                "clicks": 100000,
                "retention": 60,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "1",
                    "count": "5"
                },
                "overlay": {
                    "enabled": "1",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "1",
                    "count": "10"
                },
                "domain": {
                    "enabled": "1",
                    "count": "1"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "1"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        },
        {
            "id": 1,
            "name": "Starter",
            "free": true,
            "prices": null,
            "limits": {
                "links": 10,
                "clicks": 1000,
                "retention": 7,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "0",
                    "count": "0"
                },
                "overlay": {
                    "enabled": "0",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "0",
                    "count": "10"
                },
                "domain": {
                    "enabled": "0",
                    "count": "0"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "0"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        }
    ]
}
Subscribe a User to a Plan
PUT https://youlink.biz/api/plan/:planid/user/:userid

To subscribe a user to plan, send a PUT request to this endpoint with the plan id and user id. The type of subscription and the expiration date will need to be specified. If the expiration date is not specified, the date will be adjusted according to the type.

ПараметрОписание
type monthly | yearly | lifetime
expiration (optional) Expiration date of the plan e.g. 2023-01-03 04:20:51
curl --location --request PUT 'https://youlink.biz/api/plan/:planid/user/:userid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "monthly",
    "expiration": "2023-01-03 04:20:51"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/plan/:planid/user/:userid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'monthly',
  'expiration' => '2023-01-03 04:20:51',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "User has been subscribed to this plan."
}

Users

This endpoint is only accessible by users with admin privileges.

List Users
GET https://youlink.biz/api/users?filter=free

Get a list of all users on the platform. Data can be filtered by sending a filter parameter in the url.

ПараметрОписание
filter admin | free | pro
email Search a user by email
curl --location --request GET 'https://youlink.biz/api/users?filter=free' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/users?filter=free",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "email": "sample2@domain.com",
            "username": "sample2user",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
            "status": "free",
            "planid": 1,
            "expires": null,
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        },
        {
            "id": 1,
            "email": "sample@domain.com",
            "username": "sampleuser",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar.png",
            "status": "pro",
            "planid": 2,
            "expires": "2022-11-15 15:00:00",
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        }
    ]
}
List a Single User
GET https://youlink.biz/api/user/:id

Get data for a single user.

curl --location --request GET 'https://youlink.biz/api/user/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/user/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "data": {
        "id": 2,
        "email": "sample2@domain.com",
        "username": "sample2user",
        "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
        "status": "free",
        "planid": 1,
        "expires": null,
        "registered": "2020-11-10 18:01:43",
        "apikey": "ABC123DEF456"
    }
}
Create User
POST https://youlink.biz/api/user/add

To create a user, use this endpoint and send the following information as JSON.

ПараметрОписание
username (required) User's username. Needs to be valid.
email (required) User's email. Needs to be valid.
password (required) User's password. Minimum 5 characters.
planid (optional) Premium plan. This can be found in the admin panel.
expiration (optional) Membership expiration example 2020-12-26 12:00:00
curl --location --request POST 'https://youlink.biz/api/user/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "username": "user",
    "password": "1234567891011",
    "email": "demo@yourwebsite.com",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/user/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'username' => 'user',
  'password' => '1234567891011',
  'email' => 'demo@yourwebsite.com',
  'planid' => 1,
  'expiration' => '2020-11-20 11:00:00',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "User has been registered.",
    "data": {
        "id": 3,
        "email": "demo@yourwebsite.com",
        "username": "user"
    }
}
Delete User
DELETE https://youlink.biz/api/user/:id/delete

To delete a user, use this endpoint.

curl --location --request DELETE 'https://youlink.biz/api/user/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/user/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "message": "User has been deleted."
}
Login User
GET https://youlink.biz/api/user/login/:id

This endpoint will generate a unique link that will allow the user to automatically login to the platform. SSO login urls are valid for 1 hour and they can be used a single time.

curl --location --request GET 'https://youlink.biz/api/user/login/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://youlink.biz/api/user/login/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Ответ сервера
{
    "error": 0,
    "url": "https:\/\/youlink.biz\/user\/login\/sso\/zdskwtifjhsyspvqutqjwainkciiatrh"
}